Privacy Policy    |    Sitemap    |    Webmail
Contact: +92 (0)42 3597 1446
Email: info@aci.com.pk
 
 
 
 
 
Sulphuric Acid

Sulphuric Acid is a strong dibasic acid. in addition, it is also a strong oxidizing and dehydrating agent. It is one of the most widely employed chemicals and enters into many industries, though infrequently appearing in the finished material. Its widespread usage lead Justus, Baron von Liebig, to make the following statement: “The commercial prosperity of a nation can be measured by the amount of sulphuric acid it consumes.”

Available Packaging:
ACI's sulphuric acid is available in 25 or 50 kg plastic jars, or in bulk (10 metric ton road tanker) as per the client's requirement.

Storage, Handling and Safety Measures:
when not in use, Sulphuric Acid containers should tightly be closed. It should be stored in a cool, dry, well-ventilated area away from incompatible, combustible and alkaline substances. Avoid breathing spray or mist. Whenever mixing with water is required, always make sure that the acid is added to water and not the other way around. The following safety measures should be taken when dealing with sulphuric acid:

  • Concentrated solutions of acid are extremely corrosive.
  • Dissolution of sulphuric acid in water is very exothermic; enough heat may be released to make the water boil.
  • Always use safety glasses, neoprene, butyl rubber, polyethylene or PVC gloves, and protective clothing while handling sulphuric acid.
  • If swallowed, do not induce vomiting. Drink plenty of water and seek medical help immediately.
  • Contact with the eyes or skin can cause serious permanent damage. In case of contact with eyes or skin, wash the affected area with plenty of water for at least 15 minutes and seek medical help immediately.


Technical Specifications of ACI's Industrial Grade Sulphuric Acid

Parameter  Value
Chemical formula H2SO4
Colour Colourless to slightly yellow oily liquid
Odour Odourless
Molecular Mass 98.06 g/mol
Purity 98 ±0.5%
Density at 15.5 oC 1.84 g/cm3
Melting Point -35 oC to 10.37 oC (93% to 100% purity)
Boiling Point 290 oC to 338 oC (decomposes)
Vapour pressure at 20 oC <0.0001 kPa
Iron, [Fe] <50 ppm (part per million)
Residue on ignition 0.1 ±0.02%
Solubility Exothermically soluble in water

Technical Specifications of Electrolyte Grade Sulphuric Acid

Parameter  Value
Chemical formula H2SO4
Colour Clear and colourless
Iron, [Fe] 0.00%
Density at 15.5 oC 1.84 g/cm3
Residue on ignition 0.01%
Zinc, [Zn] 0.00%
Copper, [Cu] 0.00%
Boiling Point Arsenic, [As] Negligible
Selenium, [Se] Negligible
Manganese, [Mn] 0.00%
Sulphurous acid, H2SO3 0.00%
Chloride as [Cl] 0.00%
Organic Matter No perceptible charring on dehydration

 

NOTE: If further information is required, please do not hesitate to contact us.

 
Products
 
News & Updates
 
 
 
         
 
 
Privacy Policy
Protecting your privacy is very important to us at Akbari Chemical Industries (referred to as aci.com.pk). It is always your choice whether or not to provide personal information through the Web Site. Any personal information you provide will be treated with care, and subject to this Policy will not be misused or disclosed... more
 
Find us on:

 
© 2012 AKBARI CHEMICAL INDUSTRIES. All rights reserved.
Powered by: IT-Department of Akbari Chemical Industries